21100002

Détails

Réf. fabricant21100002
Réf. EindustN/A
FabricantELTAKO
Désignation de l'articleIMPULSE SWITCH. 1 NO CONTACT POTENTIAL FREE 16A/250V AC
Description de l'articleImpulse switch. 1 NO contact potential free 16A/250V AC. Incandescent lamp load up to 2000W. NO standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18MM wide, 58MM deep. With the patented ELTAKO duplex technology (DX) the normally potential-free contacts CAN still switch in zero passage when switching 230V AC 50HZ and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (n) and l to 1(L) for this. This results in an standby consumption of only 0.1 watt. If the contact is used for controlling switching devices which do not perform zero passage switching themselves, (n) should not be connected because the additional closing delay otherwise causes the opposite effect. Either universal control voltage 8 to 230V uc at the control input +A1/A2 or 230V with glow lamp current up to 5MA at the control input (L)/-A2(N). The simultaneous u
Groupe d'articlesAutomation & Control
Quantité minimale de commande1

Documents

Fiche techniqueTélécharger

Spécifications

Fin de vie2099-12-31
Division d’articleN/A
Sous-division d’articleN/A
Pays d’origineN/A

Classifications

HSCODEN/A

Commander ce produit

N/A

Devis requis

1